Manufacturing Services

Internal NC State Projects

Instructions:

• The form needs to be signed by the project PI and your department’s accounts manager
• Have an approved budget amount

External Customers

Instructions:

• The form must be signed by both the client and NC State

Our polymer machines provide us with excellent resources for rapidly producing functional models and training Edward P. Fitts Department of Industrial and Systems Engineering students in the basics of additive manufacturing in an affordable way.

Polymer Additive Manufacturing Machines include:

• Formlabs Form 2 & 3 SLA 3D Printers
• Stratasys J850 Material Jetting 3D Printer
• HP Jet Fusion 580 Color 3D Printer
• Formlab Fuse SLS 3D printer
• Rapidshape RS Inline Automated 3D Printer
• Rapidshape D50+ DLP 3D Printer
• Markforged Mark 2 FDM 3D Printer
• Stratasys FDM 3D Printers (F370, F170, F120, UPrint)
• Bambu Lab Carbon X1 Printer

HP Jet Fusion 580 3D Printer

The Jet Fusion 580 showcases the ability of binder jetting technology, printing full-color functional parts with strong mechanical properties. The Jet Fusion 580 deposits 80-micron-thick layers of nylon 12 powder then uses printheads to selectively add binder agent and ink before curing with a fusing lamp. The 1200 dpi printheads provide even higher resolution in the x and y directions, with each jetted droplet equivalent to 22 microns, or about half the cross section of a human hair. Through this highly accurate process, the Jet Fusion 580 produces stunning models requiring no support structures and minimal post-processing in a matter of hours.

Stratasys J850

Using PolyJet multi-material 3D printing technology, the Stratasys J850 can create complex models within hours. It uses a material jetting printhead and UV curing lamp to print parts in photopolymer resin. With its 350 × 350 × 200 mm build tray and 16-micron resolution, the Stratasys J850 provides the power to prototype complex, detailed, assembled products in a variety of materials. Using the Digital Materials mode it is possible to print in blends of two different photopolymer resins, allowing for as many as 14 unique composite materials to be printed simultaneously in a single part. This eliminates the need for time-consuming assembly and allows for the creation of multi-material parts which would be impossible by most other additive manufacturing methods.

FormLabs

There are three FormLabs machines at CAMAL which use very different additive manufacturing processes; these are the Form 2, Form 3, and Fuse 1.

The Form 2 and Form 3 utilize a vat photopolymerization process known as stereolithography, or SLA. Using a high-power laser to selectively polymerize photopolymer resin, the Form 2 and Form 3 quickly build models on an upside-down build platform. With a catalogue of 32 unique photopolymer resins, FormLabs’ SLA printers are an attractive option for printing parts with material properties that cannot be replicated by most other additive manufacturing methods. The Form 3 has a build envelope of 14.5 x 14.5 x 18.5 cm, and its maximum resolution of 25 microns in the x, y, and z directions ensures dimensional accuracy with smooth surface finish. These printers are paired with the Form Wash and Form Cure, automated post-processing stations which tailor the cleaning and curing processes to each printable resin. The Form Wash cleans parts within minutes of printing completion, and the Form Cure station ensures that parts are cured to achieve optimal mechanical properties in 30 minutes or less.

The Fuse 1 by FormLabs expands their laser technologies to include Selective Laser Sintering, or SLS. Offering both Nylon 12 and Nylon 11, the Fuse 1 uses a laser to selectively sinter 110-micron-thick layers of nylon powder together. This process produces parts with high strength, high durability, and smooth surface finish, and the support-free process means minimal post-processing. The 200 micron resolution and 16.5 x 16.5 x 30 cm build volume accommodate large, highly-detailed parts, and the interchangeable build chambers allow for successive prints with no wait in between. The accompanying Fuse Sift station offers all of the tools required for easy part cleaning and recycling of nylon powder. The Fuse 1 is a great choice for anyone requiring functional prototypes for high strength applications.

Markforged Mark 2

Offering the strongest parts available from any of CAMAL’s polymer additive manufacturing machines, the Markforged Mark 2 is a Fused Deposition Modeling (FDM) machine which can create aluminum-strength parts on a desktop. Its signature Onyx material, a blend of nylon and carbon fiber, may be reinforced with a variety of fiber materials – nylon, carbon fiber, kevlar, or fiberglass. With the ability to customize infill structures, fiber patterns, and part density, the Mark 2 allows for mechanical properties to be tailored to the specific needs of a part. The Mark 2 leaves parts with a superior, smooth surface finish to minimize post-processing and increase rapid prototyping efficiency.

Stratasys

Over the past 20 years, Stratasys had produced a variety of Fused Deposition Modeling (FDM) printers, eight of which can be found at CAMAL. These machines allow ISE students to get hands-on experience with 3D printing by using affordable materials and intuitive software. These machines utilize dissolvable support material, simplifying post-processing to the use of a support removal bath.

Three uPrint SE Plus printers offer printing in ABS in an 8 x 8 x 6 in. build volume. The larger Dimension 1200 bst also prints in ABS but provides a significantly larger build volume at 10 x 10 x 12 in.

New to CAMAL are four machines from Stratasys’ F123 series. These machines allow for greater customization of infill and supports than previous generation Stratasys FDM printers and even allow for feature-based customization of CAD models. The two F120 printers can print in both ABS-M30 and ASA materials and have a build volume of 10 x 10 x 10 in. The F170 provides the same build volume but adds PLA, TPU, and ABS-CF10 to it’s material options. The largest FDM machine at CAMAL is the F370 with a 14 x 10 x 14 in. build volume. The F370 has even more material options than the F170, adding PC-ABS and Diran materials. The Insight software which is exclusively compatible with the F370 allows for fine-tuning of slicing and toolpaths to ensure that the F370 can produce the very best part that Stratasys’ FDM machines have to offer.

Bambu Lab X1

The Bambu Lab X1 Carbon is an FDM (Fused-Deposition-Modeling) style printer that can use up to 4 filament types at once for a print which allows for prints with multiple colors and materials. It supports PLA, PETG, TPU, ABS, ASA, PVA, and PET filament types. It has enhanced level detection, vibration compensation, and spaghetti detection to ensure print quality and speed.

Rapidshape D50+

The Rapidshape D50 utilizes digital light processing (DLP), which prints faster than SLA
printers. The build envelope is 231 x 130 x 300 mm. However, when automatic part
separation is enabled, the height is limited to 100 mm. The D50+ is designed for dental
applications such as surgical guides and crown molds

Rapidshape RS Inline

The Rapidshape RS Inline is a fully automated 3D printing system that combines 5 DLP
printers with a conveyor system. It is designed to mass-produce dental application 3Dprinted parts at a rate of 45,000 parts per day. Currently used to develop fully
automated system.