Articles in Nonrefereed Conference Proceedings

Harvey West, Ola Harrysson, Tim Horn, Denis Cormier, Ron Aman, and Denis Marcellin-Little. “Novel Materials and Structures Fabricated by Electron Beam Melting”, Microscopy and Microanalysis, Portland, OR, August 2-6, 2015.

Conference Posters

Zaynab Mahbooba, Dr. Ola Harrysson, Dr. Timothy Horn, Dr. Harvey West, Dr. Harvey West, Dr. Andrzej Wojcieszynski, Tailoring Microstructure in AM, ISERC 2016, Anaheim, CA, May 22-24

Webster CE, Koballa EM, Marcellin-Little DJ, Bernacki S, Harrysson OL, Robertson I., An Assessment of Computed Tomography Imaging Modalities in Small Joints.  ISERC 2016, Anaheim, CA, May 22-24

Koballa EM, Webster CE, Marcellin-Little DJ, Bernacki S, Harrysson OL, Robertson I. Evaluation of the accuracy of computed tomography and microcomputed tomography of the feline carpus.  Merial – NIH National Veterinary Scholar Symposium, Davis CA August 2015

Park KM, Marcellin-Little DJ, Webster CE, Harrysson OL, Bell AL, Russel SE. Three-Dimensional Assessment of the Shape of the Canine Radius Using Computer Aided Design Software. Merial – NIH National Veterinary Scholar Symposium, Davis CA August 2015

Rose AS, Kimbell JS, Webster CE, Harrysson OL, Formeister EJ, Buchman CA.  Design of a 3D model for temporal bone surgical simulation. Mimics Innovation Conference, Chicago, IL, May 2014.

Rose AS, Kimbell JS, Webster CE, Harrysson OL, Formeister EJ, Buchman CA.  Developing a 3D model for pediatric temporal bone surgical simulation. American Society of Pediatric Otolaryngology (ASPO) Annual Meeting, Las Vegas, NV, May 2014.

Smith, EJ, DJ Marcellin-Little, OL Harrysson, and EH Griffith, “Geometry of the Humerus in Chondrodystrophic, Brachycephalic, and Non-chondrodystrophic Dogs,” Poster Presentation. Biomedical Engineering Society Annual Meeting, Tampa, FL, 8 October 2015.

Smith, EJ, DJ Marcellin-Little, OL Harrysson, EH Griffith, “Geometry of the Canine Humerus,” Poster Presentation, 10th Annual NC State Graduate Student Research Symposium, Raleigh, NC, 25 March 2015.

Contributed Talks and Presentations

Zaynab Mahbooba, Timothy Horn, Ola Harrysson, Harvey West, Andrzej Wojcieszynski, Peeyush Nandwana, Ryan Dehoff, Electron Beam Melt Fabricated Ti-6Al-4V with Boron Additions, MS&T Conference 2016, Salt Lake City, UT, October 25

Christopher Rock, Hengfeng Gu, Harvey West, Zaynab Mahbooba, Chris Ledford, Ola Harrysson, and Tim Horn, The influence of powder reuse on the properties of ATI 718 (TM)  in laser powder bed additive manufacturing, Material Science & Technology 2016, Salt Lake City, UT, October 2016

Mohsen Seifi, Aref Yadollahi, Nima Shamsaei, Timothy Horn, Ola Harrysson, John Lewandowski, Fatigue Crack Initiation and Growth Behavior of EBM Ti6Al4V Before and After Hot Isostatic Pressing, MS&T Conference 2016, Salt Lake City, UT, October 25

Zaynab Mahbooba, Dr. Ola Harrysson, Dr. Timothy Horn, Dr. Harvey West, Lena Thorsson, Dr. Mattias Unosson, Fabricaton of Fe-based Bulk Metallic Glass via Direct Metal Laser Sintering, SFF Symposium 2016, Austin, TX, August 8-10

Matthew Frank, Harshad Srinivasan, Ola Harrysson, Richard Wysk, Carter Keough, The DASH Hybrid Manufacturing Process: An Overview, SFF Symposium 2016, Austin, TX, August 8-10

Harshad, Srinivasn, Ola Harrysson, Richard Wysk, Rohit Ambekar, Effect of Rough Metal AM Surfaces on Laser Scanner Accuracy, Dimensional Accuracy and Surface Finishg in Additive Manufacturing by ASPE, Raleigh, NC, June 27-30, 2016

Carter Keough; Richard Wysk; Ola Harrysson; HarshadSrinivasan; Katie Basinger; Caroline Webster, Process Planning within Direct Additive and Subtractive Hybrid (DASH) Manufacturing, ISERC 2016, Anaheim, CA, May 23, 2016

Harshad Srinivasan; Ola Harrysson; Richard Wysk, Automatic feature priority assignment for automated production processes, ISERC 2016, Anaheim, CA, May 23, 2016

Austin Isaacs, Sanjay Shrestha, Zaynab Mahbooba, Guha Manogharan, Ola Harrysson, Richard Wysk and Harvey West II. “Influence of Machining Conditions on Metal Hybrid Additive Manufacturing”, Proceedings of the 2016 Industrial and Systems Engineering Research Conference. Anaheim, CA, May 21-24, 2016.

Matthew Frank, Ola Harrysson, Richard Wysk, Harshad Srinivasan, Carter Keough, Automatic Finishing of Metal AM Parts, America Makes TRX meeting, El Paso, TX, March 9, 2016

Zaynab Mahbooba, Dr. Ola Harrysson, Dr. Timothy Horn, Dr. Harvey West, Dr. Harvey West, Dr. Andrzej Wojcieszynski, Grain Refinement of EBM Built Ti6Al4V with Boron Additions, MS&T 2015, Columbus, OH

Zaynab Mahbooba, Dr. Ola L. A. Harrysson, Dr. Tim Horn, Dr.  Harvey West, The Influence of Powder Feedstock Characteristics on Powder Bed Manufacturing, SFF Symposium 2015, Austin, TX

Harshad Srinivasan, Ola Harrysson, Richard Wysk, Developing a tolerance schema for the Additive Manufacturing File format, ISERC 2015, Nashville, TN, May 31, 2015

Mona Safarzadeh, Ola Harrysson, Denis Marcellin-Little, Richard Wysk, The Use of Auxetic Structures to Design and Manufacturing of Hip Implants via Electron Beam Melting (EBM), ISERC 2015, Nashville, TN, May 31, 2015

Katie Basinger, Julianne Spencer, Ola Harrysson, Rohan Shirwaiker, Richard Wysk, Design of In Vitro Orbicular Skin Expansion Bioreactor for Trauma Treatment, ISERC 2015, Nashville, TN, June 1, 2015

Tim Horn, Ola Harrysson, Denis Marcellin-Little, Additive Manufacturing for Patient Specific Limb Sparing Endoprostheses, , Materialise World Conference 2015, Brussels, Belgium, April 23, 2015

Caroline Webster, Ola Harrysson, Austin Rose, Multi-Material Modeling for Surgical Rehearsal and Educational Models, Materialise World Conference 2015, Brussels, Belgium, April 23, 2015

Caroline Webster, Ola Harrysson, Austin Rose, Multi-Material Modeling for Surgical Rehearsal and Educational Models, Rapid 2015, Long Beach, CA, May 20, 2015

Harshad Srinivasan, Ola Harrysson, Rick Wysk, GD&T in Additive Manufacturing: An extension to the AMF file format, 2015 APSE Spring Topical Meeting on Achieving Precision Tolerances in Additive Manufacturing, Raleigh, NC, April 27, 2015

Yang, O. Harrysson, D. Cormier, H. West, “Shear Properties of the Re-entrant Auxetic Cellular Structure Made via Electron Beam Melting”, Proceedings of the 26th Solid Freeform Fabrication Symposium, Austin, TX, Aug. 10-12, 2015.

T. Horn, O. Harrysson, H. West, “The Influence of Powder Feedstock Characteristics on Powder Bed Additive Manufacturing”, Proceedings of the 26th Solid Freeform Fabrication Symposium, Austin, TX, Aug. 10-12, 2015.

Invited Talks and Presentations

Ola Harrysson, Automatic Finishing of Metal AM Components, MS&T 2016, Salt Lake City, UT, October 26

Ola Harrysson, 3D Printing, from Medicine to Space, Cardinal Gibbons High School, Raleigh, NC, October 4, 2016

Ola Harrysson, Use of Electron Beam Melting in Aerospace Additive Manufacturing, 4th Annual Additive Manufacturing for Defense and Aerospace Summit, Arlington, VA, September 28, 2016

Ola Harrysson, 3D printing, from Medicine to Space, North Carolina Science Museum, Science Saturday, Raleigh, NC, September 3

Ola Harrysson, Automatic Finishing of Metal AM components, AM3D Conference, Charlotte, NC August 23, 2016

Ola Harrysson, Metal 3D Printing of Custom Implants, ADT Foundation annual meeting, San Diego, CA,  June 17, 2016

Ola Harrysson, Additive Manufacturing for Clinical and Educational Applications, Rapid 2016 Orlando, FL, May 16

Ola Harrysson, Medical 3D Printing, Textile Biomaterials group at NCSU, Raleigh, NC, May 6, 2016

Ola Harrysson, Metal 3D Printing, RTP CFO organization, Raleigh, NC, May 6, 2016

Ola Harrysson, Ti6Al4V Powder Feedstock Characterization and Testing for EBM, EBAM 2016, Nuremberg, April 28

Ola Harrysson, How Additive Manufacturing is Changing Healthcare, NSF Workshop on Additive Manufacturing for Healthcare, Arlington, VA, March 17, 2016

Ola Harrysson, Software Solution for Finishing of Metal AM components, 3DTC Seminarium, March 15, Karlskoga, Sweden, 2016

Ola Harrysson, Tim Horn, Harvey West, New Alloy Systems for Direct Metal Powderbed Processes, TMS 2016, Nashville, TN February 15

Ola Harrysson, Invited Seminar Speaker, Medical Applications of Additive Manufacturing, Department of Mechanical Engineering, Carnegie Mellon University, February 12, 2016

Ola Harrysson, Invited Seminar Speaker, Materials Research in Additive Manufacturing, Department of Material Science and Engineering, NCSU, December 11, 2015

Ola Harrysson, Invited Speaker, The Future of Additive Manufacturing in Surgery, Additive Manufacturing and 3D Printing, IET London, December 1, 2015

Ola Harrysson, Invited Seminar Speaker, Materials and Medical Research using Additive Manufacturing Technologies, Texas A&M University, November 13, 2015

Ola Harrysson, Denis Marcellin-Little, Orthopedic Applications of Additive Manufacturing, University of North Carolina Grand Rounds for Orthopedics, Chapel Hill, NC, November 4, 2015

Ola Harrysson, Denis Marcellin-Little, 3D Printing and Orthopedic Surgery, Raleigh Science Café, Raleigh, NC, October 29, 2015

Ola Harrysson, Keynote Speaker, Production Aspects for Freeform Fabrication via 3D metal AM, State of the Art in Additive Manufacturing Seminar, Alfred Nobel Science Park, Karlskoga, Sweden, October 20, 2015

Ola Harrysson, Invited Seminar Speaker, Additive Manufacturing in Research and Education, Penn State University, University Park, PA, September 10, 2015

Ola Harrysson, Tim Horn, Harvey West, Characterization of Powders for Direct Metal Additive Manufacturing Processes, AMPM Conference in San Diego, CA May 18, 2015

Ola Harrysson, Military Applications of Additive Manufacturing, 3D Printing and & Additive Manufacturing Science & Technology Workshop, Raleigh, NC, May 11, 2015

Ola Harrysson, Materials and Medical Research using Additive Manufacturing Technologies, Research Seminar, University of Louisville, KY, April 8, 2015

Ola Harrysson, Tim Horn, Harvey West, Comparison of Mechanical Properties of Titanium (Ti6Al4V) Produced via Powder Bed Direct Metal Additive Manufacturing, TMS conference in Orlando, FL, March 18, 2015

Ola Harrysson, Veterninary Application of Additive Manufacturing, Pre Vet Club at NCSU, Raleigh, NC, February 23, 2015

Ola Harrysson, From Aerospace to Medical Applications of Additive Manufacturing Technologies, Seminar Speaker, University of Tennessee, Knoxville, TN, February 13, 2015

Publications

Zaynab Mahbooba, Harvey West, Ola Harrysson, Andrzej Wojcieszynski, Ryan Dehoff, Peeyush Nandwana, Timothy Horn, “The Effect of Hypoeutectic Boron Additions on the Grain Size and Mechanical Properties of Ti-6Al-4V Manufactured Using Powder Bed Electron Beam Additive Manufacturing”, JOMJ-D-16-00662, Accepted for Publication, November 2016, DOI: 10.1007/s11837-016-2210-9

Emily J. Smith, Denis J. Marcellin-Little, Ola L. A. Harrysson, Emily H. Griffith, ” Influence of chondrodystrophy and brachycephaly on geometry of the humerus in dogs”, VCOT-15-11-0181, 2016

Johannes Gattinger, Christian Bullemer, Ola LA Harrysson, “Patient specific root-analogue dental implants – additive manufacturing and finite element analysis”, Current Directions in Biomedical Engineering, Vol. 2 Issue 1, pp. 101-104, 2016

Joakim Karlsson Algardh, Tomothy Horn, Harvey West, Ronald Aman, Anders Snis, Hakan Engqvist, Jukka Lausmaa, Ola Harrysson, “Thickness dependency of mechanical properties for thin-walled titanium parts manufactured by Electron Beam Melting (EBM)”, Additive Manufacturing Journal, Volume 12, pp. 45-50, 2016

Mohsen Seifi, Ayman Salem, Jack Beuth, Ola Harrysson, John Lewandowski, Overview of Materials Qualification Needs for Metal Additive Manufacturing, JOM 68, 2016

Manogharan Guha, Wysk Richard, Harrysson Ola, “Additive Manufacturing-Integrated Hybrid Manufacturing and Subtractive Processes:  Economic Model and Analysis”,  International Journal of Computer Integrated Manufacturing, pp 1-16, 2015

Yang L., Harrysson O., West H., Cormier D., “Mechanical Properties of 3D Re-entrant Honeycomb Auxetic Structures Realized via Additive Manufacturing”, IJSS Paper No. IJSS-D-14-00975R2, Accepted for publication on May 5, 2015

Srinivasan, O. Harrysson, R. Wysk “Automatic Part Localization in a CNC Machine Coordinate System by Means of 3D Scans”, The International Journal of Advanced Manufacturing Technology”, Vol. 81, Issue 5-8, pp 1127-1138, 2015

Rose AS, Webster CE, Harrysson OL, Formeister EJ, Rawal RB, Iseli CE, “Pre-operative simulation of pediatric mastoid surgery with 3D-printed temporal bone models”, Int J Pediatr Otorhinolaryngol, 2015 March 10, doi: 10.1016/j.ijporl.2015.03.004

Mohsen Seifi, Matthew Dahar, Ron Aman, Ola Harrysson, Jack Beuth, John J. Lewandowski, “Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Growth Behavior of As-Deposited ARCAM EBM  Ti-6Al-4V”, JOM: the journal of the Minerals, Metals & Materials Society, 03/2015 67(3), pp 597-607

Li Yang, Ola Harrysson, Denis Cormier, Harvey West, Haijun Gong, Brent Stucker, “Additive Manufacturing of Metal Cellular Structures: Design and Fabrication”, JOM: the journal of the Minerals, Metals & Materials Society, 03/2015 67(3), pp 608-615

Ola L. A. Harrysson, Denis J. Marcellin-Llittle, Timothy J. Horn, “Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery” JOM: the journal of the Minerals, Metals & Materials Society, 03/2015 67(3)

Hazman Hasib, Ola L.A. Harrysson, Harvey A. West, “Powder Removal from Ti-6Al-4V Cellular Structures Fabricated via Electron Beam Melting”, JOM: the journal of the Minerals, Metals & Materials Society, 03/2015 67(3), pp 639-646

Rose AS, Kimbell JS, Webster CE, Harrysson OL, Formeister EJ, Buchman CA, “Multi-material 3D Models for Temporal Bone Surgical Simulation”, Ann Otol Rhinol Laryngol. 2015 Feb 6, pii: 0003489415570937

Joshua Hunsberger, Ola Harrysson, Rohan Shirwaiker, Binil Starly, Richard Wysk, Paul Cohen, Julie Allickson, James Yoo and Anthony Atala, “Manufacturing Road Map for Tissue Engineering and Regenerative Medicine Technologies”, Stem Cells Translational Medicine, January 9, 2015, doi: 10.5966/sctm.2014-0254

Ahiska, S.S. and R.E. King, (2009) Inventory control strategies in a recoverable system with state-dependent product returns, Journal of Management and Engineering Integration, 2 (1), 1-8

Ahiska, S.S. and R.E. King, (2010) Inventory optimization in a one product recoverable manufacturing system, International Journal of Production Economics, 124(1), 11-19.

Ahiska, S.S. and R.E. King, (2010) Life cycle inventory policy characterizations for a single-product recoverable system, International Journal of Production Economics, 124(1), 51-61.

Ahiska, S.S., S.R. Appaji, R.E. King, and D.P Warsing, (2013) Optimal ordering policy characterization in an unreliable supply chain, International Journal of Production Economics, 144(2), 485-496.

Cansizoglu O., Harrysson O. L. A., Cormier D. R., West II H. A., Mahale T., 2008, Properties of Ti-6Al-4V Non-stochastic Lattice Structures Fabricated Via Electron Beam Melting, Materials Science & Engineering A, 492, pp. 468-474.

Cormier, Denis R., Harrysson, Ola L. A., Mahale, Tushar, West, Harvey, 2007, Freeform Fabrication of Titanium Aluminide Via Electron Beam Melting, Research Letters in Material Science, Volume 2007, Article ID 34737, 4 pages.

Cormier, Denis R., Ola Harrysson, and Tushar Mahale.  2003.  “Rapid Manufacturing in the 21st Century.”  Journal of the Chinese Institute of Industrial Engineers, Vol. 20, No. 3, pp. 193–201.

Cormier, Denis R., Ola L. A. Harrysson, and Harvey West.  2004.   “Characterization of H13 Steel Produced via Electron Beam Melting,” Rapid Prototyping Journal, Vol. 10, No. 1, pp. 35–41.

Culbreth, C.T., J.M. Hopkins and R.E. King, (1994) An object-oriented control architecture for flexible manufacturing cells: A case study, International Journal of Flexible Automation and Integrated Manufacturing, 2(1-2), pp. 95-117.

Culbreth, C.T., R.E. King and E.T. Sanii, (1989) A flexible manufacturing system for furniture production, Manufacturing Review, 2(4), pp. 257-265.

Davis, L.B., R.E. King, T.J. Hodgson, and W.-B. Wei, (2011) Information sharing in capacity constrained supply chains under lost sales, International Journal of Production Research, 49(24), 7469-7491.

Davis, L.B., T.J. Hodgson, R.E. King, and W.-B. Wei, (2009) A Computationally Efficient Algorithm for MDPs with Restricted Observations, Naval Research Logistics, 56(1), 86-92.

Deleersnyder, J.L., T.J. Hodgson, R.E. King, P.J. O’Grady, and A. Savva, (1992) Integrating kanban type pull systems and MRP type push systems: Insights from a Markovian model, IIE Transactions, 24(3), pp. 43-56.

Ding, F.Y., T.J. Hodgson and R.E. King, (1988) A methodology for computation reduction for specially structured large scale Markov decision problems, European Journal of Operational Research, 34(1), pp. 105-112.

Fitzwater KL, Marcellin-Little DJ, Harrysson OLA, Osborne JA, Poindexter EC, Influence of Radiation Dose and Freeform Fabrication Method on Biomodeling Accuracy, Am J Vet Res, 2011;72: 1178-1185

Handfield, R., D. Warsing, and X. Wu (2009), “(Q,r) Inventory Policies in a Fuzzy Uncertain Supply Chain Environment,” European Journal of Operational Research, 197(2), 609-619.

Harrysson, O. L. A., and Denis R. Cormier.  2006.  “Direct Fabrication of Custom Orthopedic Implants using Electron Beam Melting Technology,” Chapter 9, in Advanced Manufacturing Technology for Medical Applications, Eds. I. Gibson, John Wiley & Sons, Ltd., p 193-208

Harrysson, O. L. A., Y. A. Hosni, and J. F. Nayfeh. 2007. “Custom-Designed Orthopedic Implants Evaluated Using Finite Element Analysis of Patient–Specific Computed Tomography Data: Femoral-Component Case Study,” BMC Musculoskeletal Disorders 2007, 8:91 (Online Journal)

Harrysson, Ola L. A., Denis R. Cormier, Denis Marcellin-Little, and Ketan Jajal.  2003.  “Rapid Prototyping for Treatment of Canine Limb Deformities,” Rapid Prototyping Journal, Vol. 9, No. 1, pp. 37–42.

Harrysson, Ola L. A., Omer Cansizoglu, Denis J. Marcellin-Little, Denis R. Cormier, and Harvey A. West II. 2008. “Direct Metal Fabrication of Titanium Implants with Tailored Materials and Mechanical Properties Using Electron Beam Melting Technology,” Materials Science & Engineering C, Vol. 28, No 3, pp. 366-373.

Harrysson, Ola L. A., Otto Robertsson, and Jamal Nayfeh.  2004.  “Higher Cumulative Revision Rate of Knee Arthroplasties in Younger Patients with Osteoarthritis,” Clinical Orthopedics and Related Research, No. 421, pp. 162–168.

Hartman, L., J.A. Joines, K.A. Thoney, and R.E. King, (2012) The effect speed and replenishment flexibility has on the overall costs of sourcing apparel products, Journal of the Textile Institute, 103(6),604-621.

Haslauer CM, Springer J, Harrysson OLA, Loboa EG, Monteiro-Riviere NA, Marcellin-Little DJ, In Vitro Biocompatibility of Titanium Alloy Discs Made Using Direct Metal Fabrication. Medical Engineering & Physics, 2010;32: 645-652

Hildreth III, B. E., D. J. Marcellin-Little, S. C. Roe, and O. L. A. Harrysson. 2006. “In Vitro Evaluation of Five Canine Tibial Plateau Leveling Methods,” American Journal of Veterinary Research, Vol. 67, No. 4, pp. 693–700.

Hodgson, T.J., G. Ge, R.E. King, and H. Said, (1997) Dynamic lot-size/sequencing policies in a multi-product single-machine system, IIE Transactions, 29(2), pp. 127-137.

Hodgson, T.J., R.E. King and C.U. King, (1991) Development of a production planning system: A case study, Production and Inventory Management, 1(4), pp. 18-24.

Hodgson, T.J., R.E. King, and P.M. Stanfield, (1997) Ready time scheduling with stochastic service times, Operations Research, 45(5), pp. 779-783.

Hodgson, T.J., R.E. King, K. Thoney, N. Stanislaw, A.J. Weintraub, A.J. Zozom, Jr., (2000) On satisfying due-dates in large job shops: Idle time insertion, IIE Transactions, 32, pp. 177-180.

Horn, T., Harrysson, O. L. A., “Additive Manufacturing from the past and into the future“ Science Progress , Volume 95, 33, September 2012, pp. 255-282

Houck, C.R., C.T. Culbreth, and R.E. King, (1996) Neural network scheduling of a flexible manufacturing cell using dynamic process plans, International Journal of Flexible Automation and Integrated Manufacturing, 4(3-4), pp. 213-229.

Huang, C.C, C. T. Culbreth, J.A. Joines, R. E. King, and T.J. Hodgson, (1998) Decision support system for lumber procurement and dry kiln scheduling, Forest Products Journal, 48(9), pp. 51-59.

Hunter, N.A., R.E. King and H.L.W. Nuttle, (1992) An apparel supply system for QR retailing, Journal of the Textile Institute, 83(3), pp. 462-471.

Hunter, N.A., R.E. King, and, H.L.W. Nuttle, (1996) Evaluation of traditional and quick response retailing procedures using a stochastic simulation model, Journal of the Textile Institute, 87(1), pp. 42-55.

Joines, J. A., M.G. Kay, R. E. King, and C.T. Culbreth, (2000) A hybrid genetic algorithm for manufacturing cell design, Journal of the Chinese Institute of Industrial Engineers, Special Issue on Softcomputing in Industrial Engineering, 17(5), pp. 549-564.

Joines, J. A., R. E. King, and C. T. Culbreth, (2000) Moving beyond the parts incidence matrix: Alternative routings and operations for the cell formation problem, Engineering Valuation and Cost Analysis, 2, pp. 327-348.

Joines, J.A., C.T. Culbreth and R.E. King, (1996) Manufacturing cell design: An integer programming model employing genetic algorithms, IIE Transactions, 28(1), pp. 69-85.

Joines, J.A., R.E. King and C.T. Culbreth, (1995) A comprehensive review of manufacturing cell design, International Journal of Flexible Automation and Integrated Manufacturing, 3(3-4), pp. 225-264.

Kay, M. G. and D. P. Warsing (2009), “Estimating LTL Rates Using Publicly Available Empirical Data,” International Journal of Logistics: Research and Applications, 12(3), 165-193.

King, R.E. and N.A. Hunter, (1996) Demand re-estimation and inventory replenishment of basic apparel in a specialty retail chain, Journal of the Textile Institute, 87(1), pp. 31-41.

King, R.E., L.A.C. Brain, and K.A. Thoney, (2002) Control of yarn inventory for a cotton spinning plant: part 1: Uncorrelated demand, Journal of Textile and Apparel Management, 2(2).

King, R.E., L.A.C. Brain, and K.A. Thoney, (2002) Control of yarn inventory for a cotton spinning plant: part 2: Correlated demand and seasonality, Journal of Textile and Apparel Management, 2(2).

King, R.E., T.J. Hodgson and F.W. Chafee, (1993) Robot task scheduling in a flexible manufacturing cell, IIE Transactions, 25(2), pp. 80-87.

King, R.E., W.K. Moon, H.L.W. Nuttle, and K.A. Thoney, (2002) Analysis of inventory stocking policies to support quick response retailing, Journal of the Textile Institute, 98(3), 25-35.

Kumar, V., Cormier, D., and Harrysson, O. “Electrical Conductivity of Hexagonal Periodic Lattice Structures”, Virtual & Physical Prototyping, Volume 7, issue 1, 2012, pp. 81-90

Liska, William D., Denis J. Marcellin-Little, Esa V. Eskelinen, Christopher G. Sidebotham, Ola L. A. Harrysson, and Anna K. Hielm-Björkman. 2007. “Custom Total Knee Replacement in a Dog with Femoral Condylar Bone Loss,” Veterinary Surgery, Vol. 36, pp. 293–301.

Little JP, Horn TJ, Marcellin-Little DJ, Harrysson OLA, West II HA. Development and validation of a replica of the canine radius for mechanical testing of orthopedic implants. Am J Vet Res, Vol 73, No. 1, January 2012

Lobo, B.J., T.J Hodgson, R.E. King, K.A. Thoney,  and J.R. Wilson, (2013) An effective lower bound on Lmax in a worker-constrained job shop, Computers and OR, 40(1), 328 – 343.

Lobo, B.J., T.J Hodgson, R.E. King, K.A. Thoney, and J.R. Wilson, (2013) Allocating job-shop manpower to minimize Lmax: Optimality criteria, search heuristics, and probabilistic quality metrics, Computers and OR, 40(10), 2569-2584.

Marcellin-Little DJ, Cansizoglu O, Harrysson OLA, Roe SC. In Vitro Testing of a Low Modulus Mesh Canine Prosthetic Hip Stem. Am J Vet Res, Vol. 7, No. 9, 2010, pp. 1089-1095

Marcellin-Little DJ, Harrysson OLA. Custom joint arthroplasty. In Advances in small animal total joint replacement. Jeck JN, Marcellin-Little DJ (eds), Wiley-Blackwell, Ames, Iowa. 2012

Marcellin-Little DJ, Sutherland B, Harrysson OLA, Lee ES. In vitro evaluation of free-form biodegradable bone plates for fixation of a distal femoral physeal fracture. Am J Vet Res 2010;71:1508–1515

Marcellin-Little, Denis, Harrysson, Ola L. A., Cansizoglu, Omer, 2008, In Vitro Evaluation of a Custom Cutting Jig and Custom Plate for Canine Tibial Plateau Leveling. American Journal of Veterinary Research, Vol. 69, No. 7, July 2008 pp. 961-966

Nuttle, H.L.W, R.E. King and N.A. Hunter,(1991) A stochastic model of the apparel retailing process for seasonal apparel, Journal of the Textile Institute, 82(2), pp. 247-259.

O. Cansizoglu, O. L. A. Harrysson, H. A. West II, D. R. Cormier, T. Mahale, 2008, Applications of Structural Optimization in Direct Metal Fabrication, Rapid Prototyping Journal, Vol. 14, No. 2, pp. 114-122

Osmond, C. S., D. J. Marcellin-Little, O. L. A. Harrysson, and L. B. Kidd. 2006.  “Morphometric Assessment of the Proximal Portion of the Tibia in Dogs with and without Cranial Cruciate Ligament Rupture,” Veterinary Radiology & Ultrasound, Vol. 47, No. 2, pp. 136–141.

Purser, M. F., Wysk, R. A., Shirwaiker, R. A., Harrysson, O., Cohen, P. H., Jackson, J. D., Lee, S. J., and Atala, A. J. (2012). Regenerative medicine manufacturing – A systems engineering perspective. TutORials in Operations Research, 9: 50-58. DOI: 10.1287/educ.1120.0103

Rolland, J. P., F. Biocca, H. Hua, Y. Ha, C. Gao, and O. Harrysson.  2004. “Teleportal Augmented Reality System: Integrating Virtual Objects, Remote Collaborators, and Physical Reality for Distributed Networked Manufacturing,” Chap. 13 in Virtual and Augmented Reality Applications in Manufacturing, Eds. S.K. Ong and A.Y.C. Nee, Springer-Verlag London Ltd, p 400.

Schmitt, Stephen, Harrysson, Ola L. A., 2008, Digital Fabrication of Dental Restoration: The Final Step in the Digital Process, Dentistry Today, In Press.

Schultz, S.R., T.J. Hodgson, R.E. King, and K.A. Thoney, (2004) On minimizing Lmax for the job shop scheduling problem, International Journal of Production Research, 42(23), 4893-4907.

Schultz, S.R., T.J. Hodgson, R.E. King, and M.R. Taner, (2004) Minimizing Lmax for the single machine scheduling problem with family setups and job due dates, International Journal of Production Research, 42(20), 4315-4330.

Srisawadi, S., Cormier, D., Harrysson, O., and Modak, S. (2012) “Computational Design of Electrode Networks for Preferentially Aligned Short Fiber Composite Component Fabrication via Dielectrophoresis”, International Journal of CAD/CAM, 11(2), pp. 00~00

Stanfield, P.M, J.R. Wilson, and R.E. King, (2004) Flexible modeling of correlated operation times with application in product reuse facilities, International Journal of Production Research, 42(11), 2179-2196.

Stanfield, P.M., R.E. King, and J.A. Joines, (1996) Scheduling arrivals to a production system in a fuzzy environment, European Journal of Operational Research, 93(1), pp. 75-87.

Stanfield, P.M., R.E. King, and T.J. Hodgson, (1997) Multiobjective stochastic scheduling of job ready times, Annals of OR, 70, pp. 221-239.

Stanfield, P.M., R.E. King, and T.J. Hodgson, (2006) Determining sequence and ready times in a remanufacturing system, IIE Transactions, 38, 597-607.

Taner, M.R., T.J. Hodgson, R.E. King, and K.A. Thoney, (2003) Satisfying due-dates in a job shop with sequence dependent family setups, International Journal of Production Research, 41(17), 4153-4169.

Taner, M.R., T.J. Hodgson, R.E. King, and S.R. Schultz, (2007) Satisfying Due-Dates in the Presence of Sequence Dependent Family Setups, Computers and IE, 52, 57-70.

Thomas, D. J. and D. P. Warsing (2007), “A Periodic Inventory Model for Stocking Modular Components,” Production and Operations Management 16(3), 343-359.

Thomas, D. J., D. P. Warsing and X. Zhang (2009), “Forecast Updating and Supplier Coordination for Complementary Component Purchases,” Production and Operations Management, 18(2), 167-184.

Thoney, K.A., T.J. Hodgson, R.E. King, M.R. Taner, and A.D. Wilson, (2002) Satisfying due-dates in large multi-factory supply chains, IIE Transactions, 34(9), 801-811.

Timothy Horn, Ola Harrysson, Harvey West, Jeffrey Little, Denis Marcellin-Little, “Development of a Patient Specific Bone Analog for the Biomechanical Evaluation of Custom Implants”, Journal of Rapid Prototyping, Accepted for Publication, 2012

Toni Kwan, Denis Marcellin-Little, Ola Harrysson, “Correction of Biapical Radial Deformities by Use of Bilevel Hinged Circular External Fixation and Distraction Osteogenesis in 13 Dogs”, Journal of Veterinary Surgery, Accepted for Publication, 2012

Vila-Parrish, A., J.S. Ivy, and R.E. King, (2012) Patient-based Pharmaceutical Inventory Management – A Two-Stage Inventory and Production Model for Perishable Products with Markovian Demand, Health Systems, 1, 69-83.

Warsing, D.P., Wangwatcharakul, W., and R.E. King, Optimal base-stock levels for an inventory system with imperfect supply, Computers and OR, to appear.

Weintraub, A.J., D. Cormier, T.J. Hodgson, R.E. King, J.R. Wilson, A. Zozom, (1999) Scheduling with alternatives: A link between process planning and scheduling, IIE Transactions, 31(11), pp. 1093-1102.

Wilson, A.D., R.E. King, and J.R. Wilson, (2004) Case study on statistically estimating minimum makespan for flow line scheduling problems, European Journal of OR, 155(2), 439-454.

Wilson, A.D., R.E. King, and T.J. Hodgson, (2004) Scheduling non-similar groups on a flow line: Multiple group setups, RCIM, 20(6), 505-515.

Wu, P., S.C. Fang. H.L.W. Nuttle, J.R. Wilson, and R.E. King, (1995) Guided neural network learning using a fuzzy controller with applications to textile spinning, Intl Transactions in Operations Research, 2, pp. 389-404.

Wu, P., S.C. Fang. R.E. King, and H.L.W. Nuttle, (1995) Decision surface modeling of apparel retail operations using neural network technology, International Journal of Operations and Quantitative Management, 1, pp. 33-47.

Wu, X. and D. P. Warsing (2013), “Comparing Traditional and Fuzzy-Set Solutions to (Q,r) Inventory Systems with Discrete Lead-time Distributions,” Journal of Intelligent and Fuzzy Systems, 24(1), 93-104.

Yang, L. Harrysson, O., West, H., and Cormier, D., “Compressive properties of Ti-6Al-4V auxetic mesh structures made by Electron Beam Melting”, Acta Materialia, 60 (2012) 3370-3379, Available online at www.sciencedirect.com

Yang, L. Harrysson, O., West, H., and Cormier, D., “Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure”, Journal of Materials Science. Accepted for publication, 2012

Yang, L., Cormier, D., West, H., Harrysson, O., and, Knowlson, K. “Non-Stochastic Ti-6Al-4V Foam Structures With Negative Poisson’s Ratio”, Materials Science and Engineering A (2012), http://dx.doi.org/10.1016/j.msea.2012.08.053

Zozom, A. Jr., T.J. Hodgson, R.E. King, A.J. Weintraub, and D. Cormier, (2003) Integrated job release and shop floor scheduling to minimize WIP and meet due-dates, International Journal of Production Research, 41(1), 31-45.